Inline Filters
The Pneu-Hydro bar stock component filter uses a minimum number of parts for economy and reliability. It has a strong, durable element, with a large surface area that reduces the need for frequent cleaning or replacement. A unique assembly retains the filter element solidly, preventing flutter; yet it is easily removed for cleaning or replacement. It will not contribute to system pulsation. A variety of filtration ranges are available.
The 316 stainless steel filter element and Teflon gasket permit use with a wide variety of corrosive fluids.
Specifications
| Operating pressure ranges |
|
| System pressure |
|
| Brass |
3,000 psig maximum |
| Stainless steel |
6,000 psig maximum |
| Maximum psid |
1000 across filter element (psid increases as filter collects contaminants) |
| Operating temperature ranges |
|
| Temperature range |
-65° to 450°F (-53° to 148°C) |
Ordering Information
| Inlet and Outlet Connections |
Dimensions (inches) |
Filtration Area (inches) |
Model Numbers |
||
| L |
H (across Hex flats) |
Brass |
316 Stainless |
||
| 1/4 NPT Female |
2-11/16 |
3/4 |
1.5 |
501F4B |
501F4Q |
| 1/2 NPT Female |
3-17/32 |
1 1/8 |
2.7 |
501F8B |
501F8Q |
Filter Elements
The filters listed above are supplied with the proper elements for use at specific ranges of filtration. To order a desired range, add the indicated suffix number to the basic model number. To order replacement elements, use the element part number. (Filter elements are 316 stainless steel.)
|
|||||||||||||||||||||||||||||||
Example: Model No. 501F4B-2 designates a 1/4 NPT female thread brass housing with element for 5 - 10 micron filtration. |
|||||||||||||||||||||||||||||||
 |
